кривые руки)))) - причина первая и главная))))
добавлено спустя 27 секунд:
вот.... золотые слова))))Rus писав:И потом, если делать качественно, это будет уже не самопал, а custom.
Ламповый преамп
Модератор: Noxer
-
Noxer
- The Correction Set
- Повідомлень: 2078
- З нами з: 21 вересня 2004 00:00
- Звідки: Одесса
- Контактна інформація:
Господа, вот не захарило вас язык тесать свой шершавый здесь.... Че? Времени дохерища,али как?
Я выскажу свое мнение....
Любой звук, собраный на винтажных схемах это именно то самое... Главное чтобы собирающий их человек имел руки, а не клешни, из известного места, а не из жопы....
Спорить о том что лучше... Ну бесполезная фигня,у каждого гомосапуса уши из своего места ростут...
Милостевые государи - эксперементируйте... и ложите большой с пробором, на мнения иных оппонентов... Главное ваши личные ошщущения.... Просто делайте свои эксперементы с оглядкой на классиков, любите историю, и да будет счастье вам в новом году...
Я выскажу свое мнение....
Любой звук, собраный на винтажных схемах это именно то самое... Главное чтобы собирающий их человек имел руки, а не клешни, из известного места, а не из жопы....
Спорить о том что лучше... Ну бесполезная фигня,у каждого гомосапуса уши из своего места ростут...
Милостевые государи - эксперементируйте... и ложите большой с пробором, на мнения иных оппонентов... Главное ваши личные ошщущения.... Просто делайте свои эксперементы с оглядкой на классиков, любите историю, и да будет счастье вам в новом году...
Все прекрасное, что есть в этой жизни - аморально, противозаконно, либо ведет к ожирению...
-
Tinker Bell
- Ответственный координатор
- Повідомлень: 5988
- З нами з: 20 серпня 2004 00:00
- Группа: Carnival Nevermore
- Звідки: Одесса
Вот мое барахло - Ибанез, ламповый каскад BMT TUBE WIZZARD и ламповый комбик GOBLIN YERASOV 10 ватт...
Сорри что фото плохое - это с телефона на, студии....звук замечательный, лампа рулит просто уау! ни хрипов, ни фона, ни запираний - ничего этого нет, только кристальная мощь и четкость....
Сорри что фото плохое - это с телефона на, студии....звук замечательный, лампа рулит просто уау! ни хрипов, ни фона, ни запираний - ничего этого нет, только кристальная мощь и четкость....
Уроки игры на гитаре (песни под гитару). Уроки игры на скрипке. Сольфеджио.
-
Mike
- Повідомлень: 308
- З нами з: 08 січня 2007 01:15
- Группа: Full Band
- Звідки: Odessa
- Контактна інформація:
...и зверская зависть соседейЛианна писав:Вот мое барахло - Ибанез, ламповый каскад BMT TUBE WIZZARD и ламповый комбик GOBLIN YERASOV 10 ватт...
Сорри что фото плохое - это с телефона на, студии....звук замечательный, лампа рулит просто уау! ни хрипов, ни фона, ни запираний - ничего этого нет, только кристальная мощь и четкость....
-
Tinker Bell
- Ответственный координатор
- Повідомлень: 5988
- З нами з: 20 серпня 2004 00:00
- Группа: Carnival Nevermore
- Звідки: Одесса
+1000...БМТ рулит!мои благодарности производителам!!!!!!Lead писав:Как обладатель BMT Tube Wizard II, могу сказать, что это лучший вариант за свои деньги.
А еще я обзавелась вот этим -
he LPB 2ube is the velvety entranceway your instrument has been waiting for. Much like its name suggests, this line-level preamp utilizes two tubes to deliver optimum gain while remaining quiet and transparent. Offering amazing definition and warmth that you wouldn't expect to find in a foot pedal, the LPB 2ube applies a full 300 volts to the tube plates so you get total performance and power without compromising your tone quality.
In either stereo or dual mono mode, the LPB 2ube offers numerous applications. Two warm and full frequency inputs and outputs, as well as the potential to gang the I/Os, make for a clean pre-amp stage with both a master volume and master drive controls. A highly adjustable and sweet-sounding guitar drive can be used for either recording or as an amazing front end to non-master volume vintage
У них вобще масса таких вещей...иэхх, были бы деньги...
http://www.ehx.com/ehx2/Default.asp?q=f&f=%2FCatalog
Уроки игры на гитаре (песни под гитару). Уроки игры на скрипке. Сольфеджио.
-
Tinker Bell
- Ответственный координатор
- Повідомлень: 5988
- З нами з: 20 серпня 2004 00:00
- Группа: Carnival Nevermore
- Звідки: Одесса
-
Tinker Bell
- Ответственный координатор
- Повідомлень: 5988
- З нами з: 20 серпня 2004 00:00
- Группа: Carnival Nevermore
- Звідки: Одесса
Вот про данный девайс...сорри что на буржуйском, времени нет переводить)
The LPB 2ube is the velvety entranceway your instrument has been waiting for. Much like its name suggests, this line-level preamp utilizes two tubes to deliver optimum gain while remaining quiet and transparent. Offering amazing definition and warmth that you wouldn't expect to find in a foot pedal, the LPB 2ube applies a full 300 volts to the tube plates so you get total performance and power without compromising your tone quality.
In either stereo or dual mono mode, the LPB 2ube offers numerous applications. Two warm and full frequency inputs and outputs, as well as the potential to gang the I/Os, make for a clean pre-amp stage with both a master volume and master drive controls. A highly adjustable and sweet-sounding guitar drive can be used for either recording or as an amazing front end to non-master volume vintage amps.
INPUT LEVEL Switch — Selects between LO or HI input level. The LO setting will provide
more overall gain through the LPB-2ube, the HI setting provides less gain. If the input
signal is from a low-level source such as a guitar or an instrument that uses pickups,
then the LPB-2ube will work best in the LO setting. If the input signal is from a line level
source such as a synthesizer, sampler or mixer, the LPB-2ube will work best in the HI
setting. This switch controls both the left and right channels simultaneously.
DRIVE R & DRIVE L Knobs — Adjusts the amount of gain or drive for each channel.
DRIVE R controls the right channel and DRIVE L adjusts the left channel.
VOLUME R & VOLUME L Knobs — Adjusts the overall output level or volume for each
channel. VOLUME R controls the right channel and VOLUME L adjusts the left channel.
— INDICATORS —
POWER LED — Lights when the LPB-2ube is powered on.
STATUS LED — Lights when the LPB-2ube effect is engaged; Stays off when the LPB-2ube
is in true bypass mode.
— I/O ROUTING —
Mono-to-Stereo Signal Splitter — The LPB-2ube can be configured as a signal splitter.
Plug an instrument into the R (mono) Input and leave the Left Input unplugged. This will
allow the signal going into the Right Input to go into both the right and left amplifier
channels. Each amplifier section is independently controlled. Each output can now be
processed independently, whether it is two guitar amps, a series of Electro-Harmonix
effect pedals, tape recorder inputs or two mixer channels.
Stereo-to-Stereo — To use the LPB-2ube as a stereo pre-amp, plug the left and right
outputs of your instrument into the Left and Right Inputs of the pedal respectively. Each
stereo channel is independently controlled. Connect the outputs to the inputs of your tape
recorder, mixer or power amp.
Mono — The LPB-2ube can be configured as a mono tube distortion pedal by putting the
two pre-amp channels in series. This provides 2 volumes and 2 drive controls, which can
be set for a wide variety of overdrives. Experiment with the 4 knobs and you will see the
many possibilities.…from bluesy to total grunge and anywhere in between. An additional _
patch cable will be needed, preferably one that is 1 ft. in length or shorter. Plug your
instrument into the R (mono) Input. Plug one end of the short patch cable into the Left
Input and the other end into the Right Output. The output of the LPB-2ube will come from
the Left Output jack, so plug the Left Output into your guitar amp. WARNING: This setup
can be very loud; make sure the amp is off when setting it up and the VOLUME L knob is
turned down all the way before turning the amp on.
Hard Disk Recording — Virtually all of today’s audio converters, in the home studio
market, which are related to hard disk recording not only need pre-amplification but
demand pre-amplification in order to get a clean high gain signal for optimum recording.
The LPB2ube presents an all tube, analog circuitry to give a fat signal with a warmth and
clarity that will not be lost when the signal enters the digital domain. The LPB2ube is your
first step in the audio chain. It guarantees that what is put on disk is the highest quality
sound with the character and tightness that is just unattainable from direct insertion.
The LPB 2ube is the velvety entranceway your instrument has been waiting for. Much like its name suggests, this line-level preamp utilizes two tubes to deliver optimum gain while remaining quiet and transparent. Offering amazing definition and warmth that you wouldn't expect to find in a foot pedal, the LPB 2ube applies a full 300 volts to the tube plates so you get total performance and power without compromising your tone quality.
In either stereo or dual mono mode, the LPB 2ube offers numerous applications. Two warm and full frequency inputs and outputs, as well as the potential to gang the I/Os, make for a clean pre-amp stage with both a master volume and master drive controls. A highly adjustable and sweet-sounding guitar drive can be used for either recording or as an amazing front end to non-master volume vintage amps.
INPUT LEVEL Switch — Selects between LO or HI input level. The LO setting will provide
more overall gain through the LPB-2ube, the HI setting provides less gain. If the input
signal is from a low-level source such as a guitar or an instrument that uses pickups,
then the LPB-2ube will work best in the LO setting. If the input signal is from a line level
source such as a synthesizer, sampler or mixer, the LPB-2ube will work best in the HI
setting. This switch controls both the left and right channels simultaneously.
DRIVE R & DRIVE L Knobs — Adjusts the amount of gain or drive for each channel.
DRIVE R controls the right channel and DRIVE L adjusts the left channel.
VOLUME R & VOLUME L Knobs — Adjusts the overall output level or volume for each
channel. VOLUME R controls the right channel and VOLUME L adjusts the left channel.
— INDICATORS —
POWER LED — Lights when the LPB-2ube is powered on.
STATUS LED — Lights when the LPB-2ube effect is engaged; Stays off when the LPB-2ube
is in true bypass mode.
— I/O ROUTING —
Mono-to-Stereo Signal Splitter — The LPB-2ube can be configured as a signal splitter.
Plug an instrument into the R (mono) Input and leave the Left Input unplugged. This will
allow the signal going into the Right Input to go into both the right and left amplifier
channels. Each amplifier section is independently controlled. Each output can now be
processed independently, whether it is two guitar amps, a series of Electro-Harmonix
effect pedals, tape recorder inputs or two mixer channels.
Stereo-to-Stereo — To use the LPB-2ube as a stereo pre-amp, plug the left and right
outputs of your instrument into the Left and Right Inputs of the pedal respectively. Each
stereo channel is independently controlled. Connect the outputs to the inputs of your tape
recorder, mixer or power amp.
Mono — The LPB-2ube can be configured as a mono tube distortion pedal by putting the
two pre-amp channels in series. This provides 2 volumes and 2 drive controls, which can
be set for a wide variety of overdrives. Experiment with the 4 knobs and you will see the
many possibilities.…from bluesy to total grunge and anywhere in between. An additional _
patch cable will be needed, preferably one that is 1 ft. in length or shorter. Plug your
instrument into the R (mono) Input. Plug one end of the short patch cable into the Left
Input and the other end into the Right Output. The output of the LPB-2ube will come from
the Left Output jack, so plug the Left Output into your guitar amp. WARNING: This setup
can be very loud; make sure the amp is off when setting it up and the VOLUME L knob is
turned down all the way before turning the amp on.
Hard Disk Recording — Virtually all of today’s audio converters, in the home studio
market, which are related to hard disk recording not only need pre-amplification but
demand pre-amplification in order to get a clean high gain signal for optimum recording.
The LPB2ube presents an all tube, analog circuitry to give a fat signal with a warmth and
clarity that will not be lost when the signal enters the digital domain. The LPB2ube is your
first step in the audio chain. It guarantees that what is put on disk is the highest quality
sound with the character and tightness that is just unattainable from direct insertion.
Уроки игры на гитаре (песни под гитару). Уроки игры на скрипке. Сольфеджио.
